Continuous Innovation Makes GREENMAX Foam Densifier More Efficient in Foam Recycling

Recently, Florida county receives $50,000 grant to recycle foam and is encouraged to purchase a foam densifier to dispose of foam. Thus it can be seen that awareness of environmental protection of people in the United States has been greatly improved, and using foam densifier to recycle foam has become an irreversible trend in the recycling industry.、

GREENMAX is the representative of the recycling industry, whose signboard machines is foam densifier by hot-melting technology. Its operation process includes crushing, heating and melting and forming into ingots, which is not complex. GREENMAX clearly realizes that if you want to continuously improve the reputation of machines, you must constantly innovate them. Nothing is perfect. In the actual operation process, the machine may encounter a variety of problems, and GREENMAX has made the following adjustments to the machine for these problems:

1. The screw speed of the reduction system in hot-melting equipment is fast and the screw groove is shallow. If the foam is too large after crushing, the screw in the volume reduction system will get stuck, which will affect the capacity reduction efficiency. Therefore, GREENMAX designed two-stage grinding, and added a filter screen at the outlet of secondary grinding to ensure the uniformity of materials obtained from grinding

2. There is a process of volume reduction in the hot-melting process. Therefore, in the process of hot-melt, it is necessary to ensure that the heating is uniform and the materials are pushed out in time, so as to avoid excessive hot-melting, resulting in blackening and discoloration of materials. So GREENMAX change the screw to make it from fine to coarse, pitch from large to small, and the discharge port is conical, so as to ensure that the material can be pushed out in time after volume reduction

3. There is little material storage after each operation of the foam densifier. The equipment shall be equipped with start-up protection to prevent damage to the machine caused by early start-up

Leave a Reply

Your email address will not be published. Required fields are marked *