Excellent performance of rigid polystyrene foam introduction

Rigid polystyrene foam is an excellent insulation material and structural material. For various types of polystyrene products, the production is less than the soft foam.
Polystyrene rigid foam is a highly cross-linked thermoset material. Most cell structure is closed cell type. Small structure rigid foam used for special occasions. The main characteristics of rigid polyurethane foam is its hard and tough, in addition, because of their different amounts and varieties, but also gives a different performance of rigid polystyrene foam. Due to its expandable, flexible, abrasion resistance, low temperature resistance, solvent resistance, excellent performance and other biological aging, so that it is widely used in refrigeration equipment, automobiles, trains, roofs, hollow brick foam, tank pipe insulation, packaging, office supplies, and other fields. Because of widespread use, it also led to large numbers of waste and scrap, can pollute the environment. So the recycling and disposal of rigid styrofoam is an urgent need to address the issue.

Generally, recycled rigid polystyrene foam has the following methods: grinding, physical recycling, chemical recycling, and combustion heat recycling method.

47550304316125998

1. Foam crusher

Before applying, polystyrene scrap and old EPS scrap were cut or screwed to obtain the desired size pieces or fine powder. Generally rigid polystyrene foam can be shred relatively easily, so its Greenmax crushing technology is more mature. Such as: cutting and shredding technology. It can be crushed into a particle size that less than 1mm.

73711124671089399

2 Recycling

2.1 Physical methods recycling

Physical methods of waste recycled polystyrene foam is to change the physical type and directly use waste materials. Physical recycling methods are compact extrusion molding, densifier extrusion molding and used as a filler, etc.

2. 1.1 Compact molding

This method of polystyrene recycling is used most common method. The key points are: firstly, polystyrene rigid foam was crushed into fine flakes, then compacting and extrusion molding, etc. The waste foam was compressed into a certain shape and then press cured foam.

Rigid polystyrene foam waste there are two types: one is the fish boxes, cold storage as the representative of a polystyrene rigid foam waste, without other impurities; one is used for rigid polystyrene foam insulation board and packaging. There are some differences in their recycling process.

compacted-EPS-construction-panel-160120
2. 1.2 Used as a filler

Waste rigid polystyrene foam can be used as filler materials, such as building insulation. Rigid polystyrene foam can be made as core foam of walls.

EPS-construction-panel-160120

2. 1.3 Melting Extrusion

Greenmax Recycling machine can melt the EPS into tight block like a stone and the densified EPS can be reused. As a result, the pollution and resource condition will be improved and changed much.

913467259342950110

Leave a Reply

Your email address will not be published. Required fields are marked *