Plastic replaced a large number of traditional packaging materials with its light weight, durable, beautiful, inexpensive features, led to a revolution in the packaging industry. But due to these high performance of plastics, manufactured a large number of durable plastic garbage. A large number of discarded plastic packaging has become a major scourge of environmental hazards, the main reason is that these plastic waste is difficult to handle, and can not be decomposed into dust. The existing municipal solid waste, the proportion of plastic has reached 15% -20%, most of which is single-use plastic packaging products. Plastic waste processing is not only a problem for the plastics industry, it has become a widespread concern in the international community nuisance.

In order to meet the need to protect the global environment, the world’s plastics processing industry developed a lot of new environmental technologies. In terms of saving resources, mainly to improve the resistance and performance of the old product, prolong life and so on; in terms of recycling, plastic waste is to study efficient sorting, separation technology, efficient molten recycling technology, chemical recycling technology, a fully biodegradable materials, water soluble materials, edible film; in reducing technology, mainly to study plastic waste volume reduction technology, thin film bag container technology.
In city plastic solid waste disposal, mainly included three methods that is landfills, burning and recycling. Due to different national conditions, every country are different, the United States mainly use landfill method, Europe and Japan mainly use burning method. Using landfill method, because the plastic quality is lightweight and biodegradable, it can cause landfills become soft texture group, it difficult to use in the future. Using burning process, due to the heat quantity of the plastic is large, easy to damage the heat, the resulting gas incineration will lead to global warming, some plastics when burnt will release harmful gases and caused atmospheric pollution.
Adopt recycling methods, due to the high labor-intensive, high recovery cost and the lack of appropriate recycling channels, currently the world’s recycling accounted for only about 15% of total plastic consumption. But the limited world oil resources, from the viewpoint of saving the earth’s resources point of view, plastic recycling is of great significance. To this end, the current world have invested a lot of manpower and material resources, the development of all kinds of waste plastics recycling a key technology, is committed to reducing the cost of development of plastic recycling its proper application.
A. burning recycling method
Most plastic to oil as raw material, the main component of hydrocarbons, can burn, such as polystyrene is higher than the calories burned oil dye. Some experts believe that the burning of plastic waste sent to incinerators that can provide heating or heat generation, because 86% of oil dyes was directly burned, of which only 4% is made up of plastic products, plastic run again later sent when thermal energy burn is normal, energy use is one of the last of the plastic recycling methods, can not be ignored. But many environmental groups oppose incineration of plastic, they believe that the incineration of chemical mess all concentrated combustion, will produce toxic gases. Half components of PVC is chlorine, when burned chlorine gas, will emit a strong destructive erosion, and caused dioxin culprit.
At present, Germany has an annual 200,000 tons of PVC waste, of which 30% is burned in the incinerator, burn panic, the law compelled to develop countermeasures. German Federal Environment Bureau requires all incinerators must comply with every cubic meter of exhaust gas is lower than 0.1ng (ng) limits. Incinerator air pollution standards, although Germany has been among the world’s recognized high standard, but still did not dare combustion method does not emit harmful substances due to mechanical failure, it can be expected that countries will vigorously environmental groups oppose incineration heat recovery.
B. Classification Recycling method
As plastic recycling, the most important thing is to classify. Common plastic polystyrene, polypropylene, low density polyethylene, high density polyethylene, polycarbonate, polyvinyl chloride, polyamide, polyurethane, etc., the difference between these plastics is generally difficult to distinguish. Now most of the plastic classification done by artificial. Recently a new classification machines Progress, a German Chemical Technology Institute of Invention in the infrared to identify categories, quick and accurate, but higher sorting costs.
C. Physical reduction method
Researchers began trying to extract the chemical composition within the plastic for reuse. A process used is a long chain polymer cut to restore its original character, cracking the raw material used to make new plastic. Some methods are by the addition of chemical elements as enforcing a carbon atom bonded chemical cleavage, or adding energy to promote its pyrolysis.

D. INTCO GREENMAX recycling
GREENMAX APOLO Series specialize in compressing all kinds of EPS material and can help you to reduce the volume of EPS waste up to 50:1. Some people choose to put the EPS into landfills or burn EPS material, but this action have much pollution on air, water and soil. But GREENMAX APOLO Series can compact EPS into tight block and the compacted EPS can be reused. As a result, the pollution and resource condition will be improved and changed much.