Across Europe, EPP recycling is receiving increasing attention as industries place more emphasis on circular economy practices, packaging waste reduction and resource reuse. Expanded polypropylene, or EPP, is widely used in automotive parts packaging, reusable transport packaging, logistics boxes and industrial protective packaging because of its excellent cushioning performance, durability and resistance to impact. However, these advantages also create challenges after use. EPP foam is bulky, resilient and relatively difficult to compress without proper equipment, which makes storage and transportation costly for manufacturers and recycling companies.
Europe’s policy direction is also accelerating the need for better EPP recycling solutions. The EU Packaging and Packaging Waste Regulation aims to make packaging on the EU market recyclable in an economically viable way by 2030, while also increasing the use of recycled plastics and reducing reliance on virgin materials. This policy environment is pushing companies to treat materials such as EPP not as disposable packaging waste, but as valuable recyclable resources.

Compared with EPS foam, EPP has stronger toughness and higher density, which means ordinary foam handling methods may not be enough. For EPP recycling to become practical, the material usually needs to be crushed and compacted first, so that its volume can be reduced and the compressed blocks can be transported to downstream recyclers more efficiently. GREENMAX EPP recycling machines are designed for this process, converting bulky EPP foam into compact blocks or recycled material streams that can be further reused in plastic products.
A representative European case comes from a well-known recycling company in the Czech Republic. The company processes industrial waste from local manufacturers, including approximately 10 tons of EPS packaging waste from the home appliance industry and 10 tons of EPP packaging waste from the automotive parts industry every month. The EPP material, loaded on European standard pallets, has a relatively high density of 40–70 kg/m³, which places high demands on the machine’s crushing strength and compaction stability.

After comparing screw compaction and hot melting equipment, the customer chose the GREENMAX ZC200 screw foam compactor. The machine was optimized with reinforced crushing motors and variable frequency speed control, allowing it to handle both lightweight EPS and denser EPP foam. After installation and remote commissioning, the customer was able to process around 20 tons of foam waste per month and produce compact, uniform blocks suitable for downstream recycling.
This case shows why EPP recycling will become increasingly important in Europe. As automotive, home appliance and logistics industries continue to use more EPP packaging, professional recycling equipment will be essential for turning bulky foam waste into higher-value recycled resources.